Don't worry, we don't spam. At all, ever.
by Michael Accardi January 31, 2022, 2:52 pm 3 Comments
Truck beds have always been used to transport a wide variety of objects, the formula has been the same for decades, a large undivided area for objects–typically sized to accept at least a sheet of plywood–accompanied by areas to accept ropes or cords to secure the load. Of course, tying loads down takes some effort and responsibility, and there’s always the possibility the load could become unsecured during transport. To fix this problem, Ford Motor Company has concocted a rather clever solution, and we could soon see it on trucks such as the Maverick, Ranger, F-150 and Super Duty.
Ford Motor Company has moved to patent a magnetized pickup truck bed that could seriously change the way we move cargo. And it could even be remotely controlled through a phone app.
According to a series of USPTO documents first discovered by MC&T, FoMoCo is exploring several ways to secure bed loads using magnetization. The documents detail embedding a set of magnets within the truck bed that could be used to create a magnetic field that would not only change the level of magnetic force applied but also be capable of rotating and moving relative to each other in order to create a magnetic field that encompasses the entire bed floor or just sections of it. Ford proposes either a simple handle could be used to rotate the magnets, or a more involved servo motor, drive wheel, and belt system to actuate rotation automatically.
Drawings included in the document show between four and six magnets could be embedded beneath the bed floor. The magnets could also be selectively turned on and off, meaning the bed floor could be sectioned off and magnetized based on needs.
The second disclosure of the Ford Motor Company magnetic cargo management patent details a magnetic “tie-down” system for securing cargo that wouldn’t be specifically limited to pickup truck beds like the Ford F-150 and others, as it could also be applied to SUVs like the mighty Bronco or vans like the Transit. The document outlines a plan to use strategically placed magnets that could be energized through the vehicle’s infotainment touchscreen in order to secure either a tie-down apparatus or the cargo itself in place. As illustrated, a system of this nature could allow cargo to be held overhead by magnetizing the roof thus maximizing the useable cargo space within a van or SUV.
There are certainly other factors that would have to be worked out for a magnetic system to come to market. Magnetic flux can wreak havoc on vehicle electronic systems, so Ford would need to devise a way to insulate the wiring that lives below the pickup bed from being adversely affected. Things like fuel pump wiring could be affected, along with key rear axle systems like wheel speed sensors and ABS. In the case of SUVs like the Ford Expedition, the electronic Limited Slid Differential could be adversely affected, along with park sensors or even interior lighting.
As with all patent documents, it’s unclear if or when Ford could implement a system of this nature. But in the pickup truck space, where Michigan’s Big Three automakers constantly are one-upping each other, your neighbor bragging about an F-150 with a magnetic truck bed could soon be something that happens in the future.
Never miss out on American muscle cars, trucks, and SUV news!
Get your updates from our daily 10-second email newsletter
Don't worry, we don't spam. At all, ever.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
Heck yeah, sign me up for the daily MC&T 10-Second Newsletter!
Notify me of follow-up comments by email.
Notify me of new posts by email.
People with pacemakers cannot be around strong magnets and other electrical sources i.e. arc welders etc. Even if the device can be shut off there is always the possibility that it was inadvertently left on or accidently switched on. This could possibly lead to law suits against the ford motor company.
this is a very stupid idea, do not do this and you also know it is a bad idea
Magnetic truck box ! Great if you are hauling steel, but what about wood, plastic, cardboard and non metallic metal.
The System Will Be Available To Other Manufacturers Later
Maverick And Ranger Marketing Manager Trevor Scott Explains
Despite Strong Momentum From The Bronco And Maverick, SEMA Announced Grim News
The Patent Describes It As A “Detachable Workpiece Support Apparatus”
Vice President Duncan Aldred Shares A Few Details On How Big Red Plans On Big Sales Gains
The Mode Seems To Be Targeting The Front Tires
We Also Get Our First Mentioning Of “Next Generation” Upgrades
A Summertime Debut Is Imminent
by Zac M. April 26, 2022, 7:00 am
by Zac M. May 1, 2022, 2:27 pm
by Manoli Katakis April 18, 2022, 6:29 pm
by Zac M. April 20, 2022, 3:14 am
Never miss out on American muscle cars, trucks, and SUV news!
Don't worry, we don't spam. At all, ever.
We live in a great time for vehicle performance, and Muscle Cars and Trucks is your source for performance car and truck news brought to you by three automotive media industry veterans. Learn more…
Never miss out on American muscle cars, trucks, and SUV news!
Don't worry, we don't spam. At all, ever.
Subscribe NOW and never miss out on the latest news on American muscle cars, trucks, and SUVs.
Don't worry, we don't spam. At all, ever.